PCGUIA 114/PC Guia 114.iso/Software/Produtividade/Apache 2.0.52/apache_2.0.52-win32-x86-no_ssl.msi/Data.Cab/F278391_mpm_common.xml

Extensible Markup Language | 2004-04-17 | 39.2 KB | 907 lines

<?xml version="1.0"?>
<!DOCTYPE modulesynopsis SYSTEM "../style/modulesynopsis.dtd">
<?xml-stylesheet type="text/xsl" href="../style/manual.en.xsl"?>
<!-- $Revision: 1.21.2.10 $ -->

<!--
 Copyright 2002-2004 The Apache Software Foundation

 Licensed under the Apache License, Version 2.0 (the "License");
 you may not use this file except in compliance with the License.
 You may obtain a copy of the License at

     http://www.apache.org/licenses/LICENSE-2.0

 Unless required by applicable law or agreed to in writing, software
 distributed under the License is distributed on an "AS IS" BASIS,
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.
-->

<modulesynopsis metafile="mpm_common.xml.meta">

<name>mpm_common</name>
<description>A collection of directives that are implemented by
more than one multi-processing module (MPM)</description>
<status>MPM</status>

<directivesynopsis>
<name>AcceptMutex</name>
<description>Method that Apache uses to serialize multiple children
accepting requests on network sockets</description>
<syntax>AcceptMutex Default|<var>method</var></syntax>
<default>AcceptMutex Default</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>perchild</module>
<module>prefork</module><module>threadpool</module><module>worker</module>
</modulelist>

<usage>
    <p>The <directive>AcceptMutex</directive> directives sets the
    method that Apache uses to serialize multiple children accepting
    requests on network sockets. Prior to Apache 2.0, the method was
    selectable only at compile time. The optimal method to use is
    highly architecture and platform dependent. For further details,
    see the <a href="../misc/perf-tuning.html">performance tuning</a>
    documentation.</p>

    <p>If this directive is set to <code>Default</code>, then the
    compile-time selected default will be used. Other possible
    methods are listed below. Note that not all methods are
    available on all platforms. If a method is specified which is
    not available, a message will be written to the error log
    listing the available methods.</p>

    <dl>
      <dt><code>flock</code></dt>
      <dd>uses the <code>flock(2)</code> system call to lock the
      file defined by the <directive module="mpm_common"
      >LockFile</directive> directive.</dd>

      <dt><code>fcntl</code></dt>
      <dd>uses the <code>fcntl(2)</code> system call to lock the
      file defined by the <directive module="mpm_common"
      >LockFile</directive> directive.</dd>

      <dt><code>posixsem</code></dt>
      <dd>uses POSIX compatible semaphores to implement the mutex.</dd>

      <dt><code>pthread</code></dt>
      <dd>uses POSIX mutexes as implemented by the POSIX Threads
      (PThreads) specification.</dd>

      <dt><code>sysvsem</code></dt>
      <dd>uses SySV-style semaphores to implement the mutex.</dd>
    </dl>

    <p>If you want to find out the compile time chosen default
    for your system, you may set your <directive module="core"
    >LogLevel</directive> to <code>debug</code>. Then the default <directive
    >AcceptMutex</directive> will be written into the <directive
    module="core">ErrorLog</directive>.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>BS2000Account</name>
<description>Define the non-privileged account on BS2000
machines</description>
<syntax>BS2000Account <var>account</var></syntax>
<contextlist><context>server config</context></contextlist>
<modulelist><module>perchild</module><module>prefork</module></modulelist>
<compatibility>Only available for BS2000 machines</compatibility>

<usage>
    <p>The <directive>BS2000Account</directive> directive is available for
    BS2000 hosts only. It must be used to define the account number for
    the non-privileged apache server user (which was configured using the
    <directive module="mpm_common">User</directive> directive). This is
    required by the BS2000 POSIX subsystem (to change the underlying BS2000
    task environment by performing a sub-LOGON) to prevent CGI scripts
    from accessing resources of the privileged account which started the
    server, usually <code>SYSROOT</code>.</p>

    <note><title>Note</title>
      <p>Only one <code>BS2000Account</code> directive can be used.</p>
    </note>
</usage>
<seealso><a href="../platform/ebcdic.html">Apache EBCDIC port</a></seealso>
</directivesynopsis>

<directivesynopsis>
<name>CoreDumpDirectory</name>
<description>Directory where Apache attempts to
switch before dumping core</description>
<syntax>CoreDumpDirectory <var>directory</var></syntax>
<default>See usage for the default setting</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_winnt</module><module>perchild</module><module>prefork</module>
<module>threadpool</module><module>worker</module></modulelist>

<usage>
    <p>This controls the directory to which Apache attempts to
    switch before dumping core. The default is in the
    <directive module="core">ServerRoot</directive> directory, however
    since this should not be writable by the user the server runs
    as, core dumps won't normally get written. If you want a core
    dump for debugging, you can use this directive to place it in a
    different location.</p>

    <note><title>Core Dumps on Linux</title>
      <p>If Apache starts as root and switches to another user, the
      Linux kernel <em>disables</em> core dumps even if the directory is
      writable for the process. Apache (2.0.46 and later) reenables core dumps
      on Linux 2.4 and beyond, but only if you explicitly configure a <directive
      >CoreDumpDirectory</directive>.</p>
    </note>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>EnableExceptionHook</name>
<description>Enables a hook that runs exception handlers
after a crash</description>
<syntax>EnableExceptionHook On|Off</syntax>
<default>EnableExceptionHook Off</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>perchild</module>
<module>prefork</module><module>threadpool</module>
<module>worker</module></modulelist>
<compatibility>Available in version 2.0.49 and later</compatibility>

<usage>
    <p>For safety reasons this directive is only available if the server was
    configured with the <code>--enable-exception-hook</code> option. It
    enables a hook that allows external modules to plug in and do something
    after a child crashed.</p>

    <p>There are already two modules, <code>mod_whatkilledus</code> and
    <code>mod_backtrace</code> that make use of this hook. Please have a
    look at Jeff Trawick's <a
    href="http://www.apache.org/~trawick/exception_hook.html"
    >EnableExceptionHook site</a> for more information about these.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>Group</name>
<description>Group under which the server will answer
requests</description>
<syntax>Group <var>unix-group</var></syntax>
<default>Group #-1</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpmt_os2</module><module>perchild</module><module>prefork</module>
<module>threadpool</module><module>worker</module></modulelist>
<compatibility>Only valid in global server config since Apache
2.0</compatibility>

<usage>
    <p>The <directive>Group</directive> directive sets the group under
    which the server will answer requests. In order to use this
    directive, the server must be run initially as <code>root</code>. If
    you start the server as a non-root user, it will fail to change to the
    specified group, and will instead continue to run as the group of the
    original user. <var>Unix-group</var> is one of:</p>

    <dl>
      <dt>A group name</dt>
      <dd>Refers to the given group by name.</dd>

      <dt><code>#</code> followed by a group number.</dt>
      <dd>Refers to a group by its number.</dd>
    </dl>

    <example><title>Example</title>
      Group www-group
    </example>

    <p>It is recommended that you set up a new group specifically for
    running the server. Some admins use user <code>nobody</code>,
    but this is not always possible or desirable.</p>

    <note type="warning"><title>Security</title>
      <p>Don't set <directive>Group</directive> (or <directive
      module="mpm_common">User</directive>) to <code>root</code> unless
      you know exactly what you are doing, and what the dangers are.</p>
    </note>

    <p>Special note: Use of this directive in <directive module="core"
    type="section">VirtualHost</directive> is no longer supported. To
    configure your server for <a href="mod_suexec.html">suexec</a> use
    <directive module="mod_suexec">SuexecUserGroup</directive>.</p>

    <note><title>Note</title>
      <p>Although the <directive>Group</directive> directive is present
      in the <module>beos</module> and <module>mpmt_os2</module> MPMs,
      it is actually a no-op there and only exists for compatibility
      reasons.</p>
    </note>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>PidFile</name>
<description>File where the server records the process ID
of the daemon</description>
<syntax>PidFile <var>filename</var></syntax>
<default>PidFile logs/httpd.pid</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_winnt</module><module>mpmt_os2</module>
<module>perchild</module><module>prefork</module>
<module>threadpool</module><module>worker</module></modulelist>

<usage>
    <p>The <directive>PidFile</directive> directive sets the file to
    which the server records the process id of the daemon. If the
    filename is not absolute then it is assumed to be relative to the
    <directive module="core">ServerRoot</directive>.</p>

    <example><title>Example</title>
      PidFile /var/run/apache.pid
    </example>

    <p>It is often useful to be able to send the server a signal,
    so that it closes and then re-opens its <directive
    module="core">ErrorLog</directive> and <directive
    module="mod_log_config">TransferLog</directive>, and
    re-reads its configuration files. This is done by sending a
    SIGHUP (kill -1) signal to the process id listed in the
    <directive>PidFile</directive>.</p>

    <p>The <directive>PidFile</directive> is subject to the same
    warnings about log file placement and <a
    href="../misc/security_tips.html#serverroot">security</a>.</p>

    <note><title>Note</title>
      <p>As of Apache 2 it is recommended to use only the <a
      href="../programs/apachectl.html">apachectl</a> script for
      (re-)starting or stopping the server.</p>
    </note>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>Listen</name>
<description>IP addresses and ports that the server
listens to</description>
<syntax>Listen [<var>IP-address</var>:]<var>portnumber</var></syntax>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_netware</module><module>mpm_winnt</module>
<module>mpmt_os2</module><module>perchild</module>
<module>prefork</module><module>threadpool</module><module>worker</module>
</modulelist>
<compatibility>Required directive since Apache 2.0</compatibility>

<usage>
    <p>The <directive>Listen</directive> directive instructs Apache to
    listen to only specific IP addresses or ports; by default it
    responds to requests on all IP interfaces. <directive>Listen</directive>
    is now a required directive. If it is not in the config file, the
    server will fail to start. This is a change from previous versions
    of Apache.</p>

    <p>The <directive>Listen</directive> directive tells the server to
    accept incoming requests on the specified port or address-and-port
    combination. If only a port number is specified, the server listens to
    the given port on all interfaces. If an IP address is given as well
    as a port, the server will listen on the given port and
    interface.</p>

    <p>Multiple <directive>Listen</directive> directives may be used to
    specify a number of addresses and ports to listen to. The server will
    respond to requests from any of the listed addresses and ports.</p>

    <p>For example, to make the server accept connections on both
    port 80 and port 8000, use:</p>

    <example>
      Listen 80<br />
      Listen 8000
    </example>

    <p>To make the server accept connections on two specified
    interfaces and port numbers, use </p>

    <example>
      Listen 192.170.2.1:80<br />
      Listen 192.170.2.5:8000
    </example>

    <p>IPv6 addresses must be surrounded in square brackets, as in the
    following example:</p>

    <example>
      Listen [fe80::a00:20ff:fea7:ccea]:80
    </example>
</usage>
<seealso><a href="../dns-caveats.html">DNS Issues</a></seealso>
<seealso><a href="../bind.html">Setting which addresses and ports Apache
uses</a></seealso>
</directivesynopsis>

<directivesynopsis>
<name>ListenBackLog</name>
<description>Maximum length of the queue of pending connections</description>
<syntax>ListenBacklog <var>backlog</var></syntax>
<default>ListenBacklog 511</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_netware</module><module>mpm_winnt</module>
<module>mpmt_os2</module><module>perchild</module><module>prefork</module>
<module>threadpool</module><module>worker</module></modulelist>

<usage>
    <p>The maximum length of the queue of pending connections.
    Generally no tuning is needed or desired, however on some
    systems it is desirable to increase this when under a TCP SYN
    flood attack. See the backlog parameter to the
    <code>listen(2)</code> system call.</p>

    <p>This will often be limited to a smaller number by the
    operating system. This varies from OS to OS. Also note that
    many OSes do not use exactly what is specified as the backlog,
    but use a number based on (but normally larger than) what is
    set.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>LockFile</name>
<description>Location of the accept serialization lock file</description>
<syntax>LockFile <var>filename</var></syntax>
<default>LockFile logs/accept.lock</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>perchild</module>
<module>prefork</module><module>threadpool</module><module>worker</module>
</modulelist>

<usage>
    <p>The <directive>LockFile</directive> directive sets the path to
    the lockfile used when Apache is used with an <directive
    module="mpm_common">AcceptMutex</directive> value of either
    <code>fcntl</code> or <code>flock</code>. This directive should
    normally be left at its default value. The main reason for changing
    it is if the <code>logs</code> directory is NFS mounted, since
    <strong>the lockfile must be stored on a local disk</strong>. The PID
    of the main server process is automatically appended to the
    filename.</p>

    <note type="warning"><title>Security</title>
      <p>It is best to <em>avoid</em> putting this file in a world writable
      directory such as <code>/var/tmp</code> because someone could create
      a denial of service attack and prevent the server from starting by
      creating a lockfile with the same name as the one the server will try
      to create.</p>
    </note>
</usage>
<seealso><directive module="mpm_common">AcceptMutex</directive></seealso>
</directivesynopsis>

<directivesynopsis>
<name>MaxClients</name>
<description>Maximum number of child processes that will be created
to serve requests</description>
<syntax>MaxClients <var>number</var></syntax>
<default>See usage for details</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>prefork</module><module>threadpool</module><module>worker</module>
</modulelist>

<usage>
    <p>The <directive>MaxClients</directive> directive sets the limit
    on the number of simultaneous requests that will be served.  Any
    connection attempts over the <directive>MaxClients</directive>
    limit will normally be queued, up to a number based on the
    <directive module="mpm_common">ListenBacklog</directive>
    directive. Once a child process is freed at the end of a different
    request, the connection will then be serviced.</p>

    <p>For non-threaded servers (<em>i.e.</em>, <module>prefork</module>),
    <directive>MaxClients</directive> translates into the maximum
    number of child processes that will be launched to serve requests.
    The default value is <code>256</code>; to increase it, you must also raise
    <directive module="mpm_common">ServerLimit</directive>.</p>

    <p>For threaded and hybrid servers (<em>e.g.</em> <module>beos</module>
    or <module>worker</module>) <directive>MaxClients</directive> restricts
    the total number of threads that will be available to serve clients.
    The default value for <module>beos</module> is <code>50</code>. For
    hybrid MPMs the default value is <code>16</code> (<directive
    module="mpm_common">ServerLimit</directive>) multiplied by the value of
    <code>25</code> (<directive module="mpm_common"
    >ThreadsPerChild</directive>). Therefore, to increase <directive
    >MaxClients</directive> to a value that requires more than 16 processes,
    you must also raise <directive module="mpm_common"
    >ServerLimit</directive>.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>MaxMemFree</name>
<description>Maximum amount of memory that the main allocator is allowed
to hold without calling <code>free()</code></description>
<syntax>MaxMemFree <var>KBytes</var></syntax>
<default>MaxMemFree 0</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_netware</module><module>prefork</module>
<module>threadpool</module><module>worker</module><module>mpm_winnt</module></modulelist>

<usage>
    <p>The <directive>MaxMemFree</directive> directive sets the
    maximum number of free Kbytes that the main allocator is allowed
    to hold without calling <code>free()</code>. When not set, or when set
    to zero, the threshold will be set to unlimited.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>MaxRequestsPerChild</name>
<description>Limit on the number of requests that an individual child server
will handle during its life</description>
<syntax>MaxRequestsPerChild <var>number</var></syntax>
<default>MaxRequestsPerChild 10000</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>mpm_netware</module>
<module>mpm_winnt</module><module>mpmt_os2</module>
<module>perchild</module><module>prefork</module>
<module>threadpool</module><module>worker</module></modulelist>

<usage>
    <p>The <directive>MaxRequestsPerChild</directive> directive sets
    the limit on the number of requests that an individual child
    server process will handle. After
    <directive>MaxRequestsPerChild</directive> requests, the child
    process will die. If <directive>MaxRequestsPerChild</directive> is
    <code>0</code>, then the process will never expire.</p>

    <note><title>Different default values</title>
      <p>The default value for <module>mpm_netware</module> and
      <module>mpm_winnt</module> is <code>0</code>.</p>
    </note>

    <p>Setting <directive>MaxRequestsPerChild</directive> to a
    non-zero limit has two beneficial effects:</p>

    <ul>
      <li>it limits the amount of memory that process can consume
      by (accidental) memory leakage;</li>

      <li>by giving processes a finite lifetime, it helps reduce
      the number of processes when the server load reduces.</li>
    </ul>

    <note><title>Note</title>
      <p>For <directive module="core">KeepAlive</directive> requests, only
      the first request is counted towards this limit. In effect, it
      changes the behavior to limit the number of <em>connections</em> per
      child.</p>
    </note>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>MaxSpareThreads</name>
<description>Maximum number of idle threads</description>
<syntax>MaxSpareThreads <var>number</var></syntax>
<default>See usage for details</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_netware</module><module>mpmt_os2</module>
<module>perchild</module><module>threadpool</module><module>worker</module>
</modulelist>

<usage>
    <p>Maximum number of idle threads. Different MPMs deal with this
    directive differently.</p>

    <p>For <module>perchild</module> the default is
    <code>MaxSpareThreads 10</code>. This MPM monitors the number of
    idle threads on a per-child basis. If there are too many idle
    threads in that child, the server will begin to kill threads
    within that child.</p>

    <p>For <module>worker</module>, <module>leader</module> and <module
    >threadpool</module> the default is <code>MaxSpareThreads 250</code>.
    These MPMs deal with idle threads on a server-wide basis. If there
    are too many idle threads in the server then child processes are
    killed until the number of idle threads is less than this number.</p>

    <p>For <module>mpm_netware</module> the default is
    <code>MaxSpareThreads 100</code>. Since this MPM runs a
    single-process, the spare thread count is also server-wide.</p>

    <p><module>beos</module> and <module>mpmt_os2</module> work
    similar to <module>mpm_netware</module>. The default for
    <module>beos</module> is <code>MaxSpareThreads 50</code>. For
    <module>mpmt_os2</module> the default value is <code>10</code>.</p>

    <note><title>Restrictions</title>
      <p>The range of the <directive>MaxSpareThreads</directive> value
      is restricted. Apache will correct the given value automatically
      according to the following rules:</p>
      <ul>
        <li><module>perchild</module> requires <directive
        >MaxSpareThreads</directive> to be less or equal than <directive
        module="mpm_common">ThreadLimit</directive>.</li>

        <li><module>mpm_netware</module> wants the value to be greater than
        <directive module="mpm_common">MinSpareThreads</directive>.</li>

        <li>For <module>leader</module>, <module>threadpool</module> and
        <module>worker</module> the value must be greater or equal than
        the sum of <directive module="mpm_common">MinSpareThreads</directive>
        and <directive module="mpm_common">ThreadsPerChild</directive>.</li>
      </ul>
    </note>
</usage>
<seealso><directive module="mpm_common">MinSpareThreads</directive></seealso>
<seealso><directive module="mpm_common">StartServers</directive></seealso>
</directivesynopsis>

<directivesynopsis>
<name>MinSpareThreads</name>
<description>Minimum number of idle threads available to handle request
spikes</description>
<syntax>MinSpareThreads <var>number</var></syntax>
<default>See usage for details</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_netware</module><module>mpmt_os2</module>
<module>perchild</module><module>threadpool</module><module>worker</module>
</modulelist>

<usage>
    <p>Minimum number of idle threads to handle request spikes.
    Different MPMs deal with this directive
    differently.</p>

    <p><module>perchild</module> uses a default of
    <code>MinSpareThreads 5</code> and monitors the number of idle
    threads on a per-child basis. If there aren't enough idle threads
    in that child, the server will begin to create new threads within
    that child. Thus, if you set <directive module="perchild"
    >NumServers</directive> to <code>10</code> and a <directive
    >MinSpareThreads</directive> value of <code>5</code>, you'll have
    at least 50 idle threads on your system.</p>

    <p><module>worker</module>, <module>leader</module> and
    <module>threadpool</module> use a default of <code>MinSpareThreads
    75</code> and deal with idle threads on a server-wide basis. If
    there aren't enough idle threads in the server then child
    processes are created until the number of idle threads is greater
    than number.</p>

    <p><module>mpm_netware</module> uses a default of
    <code>MinSpareThreads 10</code> and, since it is a single-process
    MPM, tracks this on a server-wide bases.</p>

    <p><module>beos</module> and <module>mpmt_os2</module> work
    similar to <module>mpm_netware</module>. The default for
    <module>beos</module> is <code>MinSpareThreads 1</code>. For
    <module>mpmt_os2</module> the default value is <code>5</code>.</p>
</usage>
<seealso><directive module="mpm_common">MaxSpareThreads</directive></seealso>
<seealso><directive module="mpm_common">StartServers</directive></seealso>
</directivesynopsis>

<directivesynopsis>
<name>ScoreBoardFile</name>
<description>Location of the file used to store coordination data for
the child processes</description>
<syntax>ScoreBoardFile <var>file-path</var></syntax>
<default>ScoreBoardFile logs/apache_status</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_winnt</module><module>perchild</module><module>prefork</module>
<module>threadpool</module><module>worker</module></modulelist>

<usage>
    <p>Apache uses a scoreboard to communicate between its parent
    and child processes.  Some architectures require a file to facilitate
    this communication. If the file is left unspecified, Apache first
    attempts to create the scoreboard entirely in memory (using anonymous
    shared memory) and, failing that, will attempt to create the file on
    disk (using file-based shared memory). Specifying this directive causes
    Apache to always create the file on the disk.</p>

    <example><title>Example</title>
      ScoreBoardFile /var/run/apache_status
    </example>

    <p>File-based shared memory is useful for third-party applications
    that require direct access to the scoreboard.</p>

    <p>If you use a <directive>ScoreBoardFile</directive> then
    you may see improved speed by placing it on a RAM disk. But be
    careful that you heed the same warnings about log file placement
    and <a href="../misc/security_tips.html">security</a>.</p>
</usage>
<seealso><a href="../stopping.html">Stopping and Restarting
Apache</a></seealso>
</directivesynopsis>

<directivesynopsis>
<name>SendBufferSize</name>
<description>TCP buffer size</description>
<syntax>SendBufferSize <var>bytes</var></syntax>
<default>SendBufferSize 0</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>leader</module>
<module>mpm_netware</module><module>mpm_winnt</module>
<module>mpmt_os2</module><module>perchild</module><module>prefork</module>
<module>threadpool</module><module>worker</module></modulelist>

<usage>
    <p>The server will set the TCP buffer size to the number of bytes
    specified. Very useful to increase past standard OS defaults on
    high speed high latency (<em>i.e.</em>, 100ms or so, such as
    transcontinental fast pipes).</p>

    <p>If set to the value of <code>0</code>, the server will use the
    OS deault.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>ServerLimit</name>
<description>Upper limit on configurable number of processes</description>
<syntax>ServerLimit <var>number</var></syntax>
<default>See usage for details</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>perchild</module>
<module>prefork</module><module>threadpool</module><module>worker</module>
</modulelist>

<usage>
    <p>For the <module>prefork</module> MPM, this directive sets the
    maximum configured value for <directive
    module="mpm_common">MaxClients</directive> for the lifetime of the
    Apache process.  For the <module>worker</module> MPM, this directive
    in combination with <directive
    module="mpm_common">ThreadLimit</directive> sets
    the maximum configured value for <directive
    module="mpm_common">MaxClients</directive> for the lifetime of the
    Apache process.  Any attempts to change this directive during a
    restart will be ignored, but <directive
    module="mpm_common">MaxClients</directive> can be modified during
    a restart.</p>

    <p>Special care must be taken when using this directive.  If
    <directive>ServerLimit</directive> is set to a value much higher
    than necessary, extra, unused shared memory will be allocated.  If
    both <directive>ServerLimit</directive> and <directive
    module="mpm_common">MaxClients</directive> are set to values
    higher than the system can handle, Apache may not start or the
    system may become unstable.</p>

    <p>With the <module>prefork</module> MPM, use this directive only
    if you need to set <directive
    module="mpm_common">MaxClients</directive> higher than 256 (default).
    Do not set the value of this directive any higher than what you
    might want to set <directive
    module="mpm_common">MaxClients</directive> to.</p>

    <p>With <module>worker</module>, <module>leader</module> and
    <module>threadpool</module> use this directive only
    if your <directive module="mpm_common">MaxClients</directive> and
    <directive module="mpm_common">ThreadsPerChild</directive>
    settings require more than 16 server processes (default). Do not set
    the value of this directive any higher than the number of server
    processes required by what you may want for <directive
    module="mpm_common">MaxClients </directive> and <directive
    module="mpm_common">ThreadsPerChild</directive>.</p>

    <p>With the <module>perchild</module> MPM, use this directive only
    if you need to set <directive
    module="perchild">NumServers</directive> higher than 8 (default).</p>

    <note><title>Note</title>
      <p>There is a hard limit of <code>ServerLimit 20000</code> compiled
      into the server. This is intended to avoid nasty effects caused by
      typos.</p>
    </note>
</usage>
<seealso><a href="../stopping.html">Stopping and Restarting Apache</a></seealso>
</directivesynopsis>

<directivesynopsis>
<name>StartServers</name>
<description>Number of child server processes created at startup</description>
<syntax>StartServers <var>number</var></syntax>
<default>See usage for details</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>mpmt_os2</module>
<module>prefork</module><module>threadpool</module><module>worker</module>
</modulelist>

<usage>
    <p>The <directive>StartServers</directive> directive sets the
    number of child server processes created on startup. As the number
    of processes is dynamically controlled depending on the load,
    there is usually little reason to adjust this parameter.</p>

    <p>The default value differs from MPM to MPM. For
    <module>leader</module>, <module>threadpool</module> and
    <module>worker</module> the default is <code>StartServers 3</code>.
    For <module>prefork</module> defaults to <code>5</code> and for
    <module>mpmt_os2</module> to <code>2</code>.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>StartThreads</name>
<description>Number of threads created on startup</description>
<syntax>StartThreads <var>number</var></syntax>
<default>See usage for details</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>beos</module><module>mpm_netware</module>
<module>perchild</module></modulelist>

<usage>
    <p>Number of threads created on startup. As the
    number of threads is dynamically controlled depending on the
    load, there is usually little reason to adjust this
    parameter.</p>

    <p>For <module>perchild</module> the default is <code>StartThreads
    5</code> and this directive tracks the number of threads per
    process at startup.</p>

    <p>For <module>mpm_netware</module> the default is
    <code>StartThreads 50</code> and, since there is only a single
    process, this is the total number of threads created at startup to
    serve requests.</p>

    <p>For <module>beos</module> the default is <code>StartThreads
    10</code>. It also reflects the total number of threads created
    at startup to serve requests.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>ThreadLimit</name>
<description>Sets the upper limit on the configurable number of threads
per child process</description>
<syntax>ThreadLimit <var>number</var></syntax>
<default>See usage for details</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>mpm_winnt</module>
<module>perchild</module><module>threadpool</module><module>worker</module>
</modulelist>
<compatibility>Available for <module>mpm_winnt</module> in Apache 2.0.41
and later</compatibility>

<usage>
    <p>This directive sets the maximum configured value for <directive
    module="mpm_common">ThreadsPerChild</directive> for the lifetime
    of the Apache process.  Any attempts to change this directive
    during a restart will be ignored, but <directive
    module="mpm_common">ThreadsPerChild</directive> can be modified
    during a restart up to the value of this directive.</p>

    <p>Special care must be taken when using this directive.  If
    <directive>ThreadLimit</directive> is set to a value much higher
    than <directive module="mpm_common">ThreadsPerChild</directive>,
    extra unused shared memory will be allocated.  If both
    <directive>ThreadLimit</directive> and <directive
    module="mpm_common">ThreadsPerChild</directive> are set to values
    higher than the system can handle, Apache may not start or the
    system may become unstable. Do not set the value of this directive
    any higher than your greatest predicted setting of <directive
    module="mpm_common">ThreadsPerChild</directive> for the
    current run of Apache.</p>

    <p>The default value for <directive>ThreadLimit</directive> is
    <code>1920</code> when used with <module>mpm_winnt</module> and
    <code>64</code> when used with the others.</p>

    <note><title>Note</title>
      <p>There is a hard limit of <code>ThreadLimit 20000</code> (or
      <code>ThreadLimit 15000</code> with <module>mpm_winnt</module>)
      compiled into the server. This is intended to avoid nasty effects
      caused by typos.</p>
    </note>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>ThreadsPerChild</name>
<description>Number of threads created by each child process</description>
<syntax>ThreadsPerChild <var>number</var></syntax>
<default>See usage for details</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>mpm_winnt</module>
<module>threadpool</module><module>worker</module></modulelist>

<usage>
    <p>This directive sets the number of threads created by each
    child process. The child creates these threads at startup and
    never creates more. If using an MPM like <module>mpm_winnt</module>,
    where there is only one child process, this number should be high
    enough to handle the entire load of the server. If using an MPM
    like <module>worker</module>, where there are multiple child processes,
    the <em>total</em> number of threads should be high enough to handle
    the common load on the server.</p>

    <p>The default value for <directive>ThreadsPerChild</directive> is
    <code>64</code> when used with <module>mpm_winnt</module> and
    <code>25</code> when used with the others.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>User</name>
<description>The userid under which the server will answer
requests</description>
<syntax>User <var>unix-userid</var></syntax>
<default>User #-1</default>
<contextlist><context>server config</context></contextlist>
<modulelist><module>leader</module><module>perchild</module>
<module>prefork</module><module>threadpool</module><module>worker</module>
</modulelist>
<compatibility>Only valid in global server config since Apache
2.0</compatibility>

<usage>
    <p>The <directive>User</directive> directive sets the user ID as
    which the server will answer requests. In order to use this
    directive, the server must be run initially as <code>root</code>.
    If you start the server as a non-root user, it will fail to change
    to the lesser privileged user, and will instead continue to run as
    that original user. If you do start the server as <code>root</code>,
    then it is normal for the parent process to remain running as root.
    <var>Unix-userid</var> is one of:</p>

    <dl>
      <dt>A username</dt>
      <dd>Refers to the given user by name.</dd>

      <dt># followed by a user number.</dt>
      <dd>Refers to a user by its number.</dd>
    </dl>

    <p>The user should have no privileges that result in it being
    able to access files that are not intended to be visible to the
    outside world, and similarly, the user should not be able to
    execute code that is not meant for HTTP requests. It is
    recommended that you set up a new user and group specifically for
    running the server. Some admins use user <code>nobody</code>, but
    this is not always desirable, since the <code>nobody</code> user
    can have other uses on the system.</p>

    <note type="warning"><title>Security</title>
      <p>Don't set <directive>User</directive> (or <directive
      module="mpm_common">Group</directive>) to <code>root</code> unless
      you know exactly what you are doing, and what the dangers are.</p>
    </note>

    <p>With the <module>perchild</module> MPM, which is intended to
    server virtual hosts run under different user IDs, the
    <directive>User</directive> directive defines the user ID for the
    main server and the fallback for <directive type="section"
    module="core">VirtualHost</directive> sections without an
    <directive module="perchild">AssignUserID</directive> directive.</p>

    <p>Special note: Use of this directive in <directive module="core"
    type="section">VirtualHost</directive> is no longer supported. To
    configure your server for <a href="../suexec.html">suexec</a> use
    <directive module="mod_suexec">SuexecUserGroup</directive>.</p>

    <note><title>Note</title>
      <p>Although the <directive>User</directive> directive is present
      in the <module>beos</module> and <module>mpmt_os2</module> MPMs,
      it is actually a no-op there and only exists for compatibility
      reasons.</p>
    </note>
</usage>
</directivesynopsis>

</modulesynopsis>